Barbed Wire Construction and Construction Precautions
One of the issues we need to consider before Barbed Wire construction is what is the actual effect of installing Barbed Wire, whether it is for different fences, or because of special geographical conditions or weather, such as galvanized Barbed in areas with dry and dry weather. Wire is OK, if the climate is humid and rainy, it is recommended to use stainless steel Barbed Wire for the long-term use of Barbed Wire.
Unfold the Barbed Wire and secure one end to the Barbed Wire post at the beginning. Tension the single Barbed Wire with a tensioner. Connect the Barbed Wire line one by one and fix the Barbed Wire. The Barbed Wire mesh is installed and moved to the next installation point. Barbed Wire Installation and Maintenance Method Barbed Wire Installation and Maintenance Method
In the tensioning process, it is necessary to pay attention to the uniform force, so that the installed Barbed Wire mesh is beautiful. After the tension is completed, a knot can be used to fix the end. The installation of the Barbed Wire is over, but check to see if the installed Barbed Wire is loose, not in place, etc. If it happens, fix it immediately. The Barbed Wire mesh is made up of multiple barbed wire and tied with a barbed wire. This makes it difficult for customers to install it. Which Barbed Wire installation and maintenance method is most suitable first. Barbed Wire's weft installations need to be installed step by step, and not multiple installations at the same time, which is both cumbersome and easy to tie the Barbed Wire directly. First, erect the temporary column on the extension of the force direction of the Barbed Wire column. Install the tensioner to tension the Barbed Wire. In order to avoid the looseness of the installed Barbed Wire, it should be gradually tightened from the bottom to the top. Tighten the Barbed Wire at one end of the middle post and then lay it out. Barbed Wire installation and maintenance methods
Note that the tensioner should be careful not to be too tight during tensioning the Barbed Wire to prevent injury due to the Barbed Wire being pulled off or the tensioner slipping off. In order to prevent Barbed Wire from slackening the barbed wire due to thermal expansion and contraction, a garland screw should be added every 80-100m, and the Barbed Wire between each screw should be supported by the movable hook to facilitate tensioning. Barbed Wire Installation and Maintenance Method Barbed Wire Installation and Maintenance Method
After considering several factors above, the next step is the installation of Barbed Wire. If the prevention personnel are the main ones, and the installation area is not particularly large, such as fish ponds, orchards, nurseries, etc., the Barbed Wire fence can be installed relatively densely, and the columns should be denser. If you are not correct, you can take advantage of it. If the Barbed Wire fence is installed in a vast grassland or desert or a sparsely populated mountainous area, and the main purpose of preventing animals is, the installation of the Barbed Wire fence can be correspondingly sparse, usually 5 lanes. For detailed installation details, please consult us to create a suitable Barbed Wire fence installation.
This category is empty.