Views: 155 Author: Site Editor Publish Time: 2018-12-21 Origin: Site
Razor Wire installation and construction process
Razor Wire is used in a wide range of applications, such as aisle platforms, gutter covers, and stair steps. However, the use of Razor Wire can also be seen in the interior ceilings that are uncommon but appear to be very tall.
Razor Wire is hot-dip galvanized as a ceiling surface. It has 30 years of no rust and maintenance-free. Its structure is light and easy to maintain. It also has an open view, ventilation and ventilation. Its lines are bright and tidy, and the layers are distinct. The simple and clear modern style has become the main product of the decoration market in recent years. The key technologies and construction methods are explained below. The construction technical problems and the whole operation steps of the steel grating ceiling are discussed in detail, and the characteristics of the steel grating ceiling technology are further elaborated.
Razor Wire Construction Method
The specific installation sequence is: boom - main keel - secondary keel - Razor Wire
Razor Wire hanger installation
1. Lift the eyebolt and the bow shackle to the platform with pulleys and ropes.
2. Screw the eyebolt into the net, screw it into the screw hole of the lower ball, and then tighten the eyebolt with the M24 thin nut.
3. The boom connected to the connecting piece in advance is lifted to the operating platform by the pulley rope, and then the boom and the eye bolt are connected together by the bow buckle, and the nut on the bow shackle is tightened on the shaft. Insert the split pin into the opening and pry the sides of the tail to prevent the nut from falling off.
4. Installation sequence. Starting from one side, it is installed in the direction of the axis. Each time two rows of booms are installed, the scaffolding uses mobile scaffolding.
This category is empty.