If only according to the material, the steel mesh material can be a steel mesh or a punched mesh. The material is naturally a variety of ordinary steel and stainless steel. If the steel mesh refers only to the steel plate tensile expansion mesh, it can be a variety of metal plate materials.
Generally speaking, the steel mesh refers to the stretched mesh of the metal plate. After the metal mesh is processed into a mesh, the area will become several times or even several times.
Generally, due to stretching, the thickness of the steel mesh is smaller than the thickness of the steel mesh raw material steel plate. Stencil mesh specifications and models generally need to be described. Stalk width Stalk thickness Long pitch Short pitch or long and short inner hole. The same long pitch, short pitch or long and short inner hole, stalk width and stalk thickness can have a variety of specifications. The same stalk width stalk thick mesh can also be large or small. The steel mesh has fewer mesh shapes, generally has a diamond shape, a fish scale shape, and a hexagonal shape. However, there is no waste in the processing process of the steel plate stretch net, but if the customer needs a special overall size, it will be cut, so the cost is low.
The general terminology says that the area of raw materials after punching the mesh is not changed. The hole shape of the punched plate mesh can be basically done, but the raw materials punched down can only sell waste products, so the same mesh opening rate and the production cost of the punched plate net are high.
This category is empty.