How galvanized Welded mesh improves corrosion resistance

How galvanized Welded mesh improves corrosion resistance

To improve the rust of the galvanized Welded mesh under normal use conditions, the following conditions shall be met: the process conditions for the production of galvanized Welded mesh shall be welded and reheated galvanized, the thickness of the galvanized layer shall not be lower than a certain limit; during storage, transportation and use In the middle should prevent moisture, try to avoid repeated bending; galvanized Welded mesh inside and outside the mortar protective layer. All should exceed a certain thickness.

Some projects use cold drawn wire mesh instead of galvanized; some are galvanized, but the galvanized process does not guarantee sufficient thickness; some welded galvanized Welded mesh production processes are first galvanized and then welded; some engineering welded mesh connections use the combustion wire binding method. All of this may reduce the durability of the galvanized Welded mesh.

Building wall insulation (most 0.5-0.8mm wire diameter, grid 1.3cm) hot-dip galvanized Welded mesh insulation project. The galvanized Welded mesh steel structure (mesh: 5 * 5cm, wire diameter 0.5-1mm) is 1.2 meters wide, 1 meter, 1.5 meters. Ring galvanized Welded mesh is also commonly used galvanized, with a long life and relatively low price.