Electronic galvanized wire manufacturing process

Electronic galvanized wire manufacturing process

Electronic galvanized wire, also known as cold-galvanized wire, is a low-carbon steel wire placed in a plating bath. The metal surface is slowly galvanized by a unidirectional current. The zinc on the Electronic galvanized wire is slower and the thickness is only hot-dip galvanized wire. one tenth,

The cold-galvanized wire is continuously plated with iron in the electroplating tank. The production speed is slow, the coating is uniform, the thickness is usually 3-15 microns, and the appearance is bright, rust-proof and decorative.

Electronic galvanized wire is made of high quality low carbon steel wire rod. It is made of high quality low carbon steel wire through drawing, pickling and rust removal, high temperature annealing, hot galvanizing and cooling.

When the cold-galvanized wire is left for a long time, it will rust, and the iron will rust easily. Because of its chemical nature, colleagues have a lot to do with external conditions. Moisture is one of the substances that make iron easy to rust. However, the presence of water does not rust the iron. Only when oxygen in the air dissolves in the water, oxygen reacts with iron in a watery environment to produce something called iron oxide. This is rust. .

Rust is a brown-red material. It is not as hard as iron. It is easy to fall off. After a piece of iron is completely rusted, the volume can swell up to 8 times. If the rust is not removed, the spongy rust is particularly easy to absorb moisture, and the iron will burn faster.

Store in a cool place and store in a sealed place. Shelf life is 18 months.