How to check the Galvanized Wire purchaser after receiving the goods

How to check the Galvanized Wire purchaser after receiving the goods
Galvanized Wire is made of high-quality low-carbon steel wire rods with good toughness and elasticity due to its galvanized layer thickness and its high corrosion resistance. When we are in the process of accepting Galvanized Wire, we need to know the point of knowledge.

1. Label. Check if the label with the label is correct and take a photo to confirm it.

2. Pull strength test. Let the factory provide the corresponding inspection report.

3. Packaging. Each roll of Galvanized Wire is fastened with a galvanized strap and tied with a very strong transparent plastic bag. The outermost layer of PVC Coated Wire is wrapped in a white woven cloth.

4. Weight aspect. Weigh the weight of a single-volume Galvanized Wire of different specifications and cannot be lower than the contract weight required by the contract.

5. Wire diameter. The wire diameter of the wire should be in accordance with the contract, and the error range is ±0.02mm.

6. Check the amount of zinc on it. Check if the amount of zinc on the contract meets the contract requirements.

7. Quantity. The quantity is the same as the contract, carefully recording the number of products for each specification and the packing method.

8. Contact detection. Each wire does not produce joints. Each joint has a smooth surface finish. Galvanized Wire cannot be pulled off from the joint to meet customer packaging requirements.