Gabion box problems and solutions in the assembly process

Gabion box problems and solutions in the assembly process

There is a problem 1. The size of the Gabion box is deformed, and a relatively large gap is formed between the Gabion boxes;

Solution: After the Gabion box is placed in place, the size inspection is carried out in time. The lower part of the gap of the Gabion box is manually woven with galvanized steel wire into a mesh shape, and the stone is filled with a tight plug;

There is a problem. 2, the cover of the Gabion box is not strong enough;

Solution: Gabion box bundles up and down or adjacent mesh with galvanized steel wire every 10-20cm;

There is a problem. 3. After the Gabion box stone is filled and the cover is closed, the stone surface is not flat.

Solution: Open the cover to refill the stone to see if the filled stone is tight and the stone surface is flat.