Galvanized Gabion production process

Galvanized Gabion production process

When using Galvanized Gabion protection, the characteristics of the river should be fully inspected and the appropriate bank protection methods should be selected, mainly including slope type, vertical type and step type bank protection. The Galvanized Gabion box was fitted with Galvanized Gabion. When assembling the wire cage, the Gabion box and the spacer web should be stretched at a 90 degree angle.

Galvanized Gabion processes the foundation and surface of the slope. Certain measurements must be made prior to construction to determine the boundary line and depth of the excavation. Ensure drainage and drainage during construction are smooth. In the process of excavating the foundation, the silt layer and the soft soil layer should be treated in time.

Galvanized Gabion boxes are filled with stone. In order to prevent the deformation of the Galvanized Gabion on the river bank, the wire rod should be entangled on the Galvanized Gabion before the stone is filled to ensure the flatness of the Galvanized Gabion and be filled after the stone filling. The fill stones of each layer should be placed evenly on the same layer of the grid to maintain a thickness of 30 cm.

Green plant vegetation. Since the gap of Galvanized Gabion is usually filled with soil, the soil is generally about 5 cm higher than the cage. After plugging, you can make full use of the soil and plant vegetation according to local soil and climate characteristics. Galvanized Gabion has a uniform surface color, natural original ecology, time saving, easy operation, small climate interference, and accelerated quality and speed. Engineering quality: one-time molding, good linearity, no error angle, smooth surface, no color difference, etc., easy maintenance.